Servo motor installation precautions
1. If the servo motor is connected to the reducer, oil should be sealed when using the servo motor to prevent the oil of the reducer from entering the servo motor.
2. Make sure that the cables are not subject to moments or vertical loads caused by external bending forces or their own weight, especially at cable exits or connections.
3. To ensure that each servo motor is installed and operated, its radial and axial loads are controlled within the specified values.
4. When installing/removing coupling parts (couplings, pulleys, sprockets, etc.) from the shaft end of the servo motor, do not hit it directly with a hammer.
15358965628